Mining
Plainly we type of missed one thing necessary within the silent modification of the Jasminer X4 1U miners described right here and that’s to take into consideration the one different factor that generates warmth contained in the miner. That’s the controller chip on the miner’s management board that usually doesn’t include a cooling heatsink on prime of it. The Xilinx Zynq-7000 SoC (XA7Z020) used shouldn’t be a conventional FPGA like we type of assumed with out correctly checking the specs of the chip. It’s the truth is a dual-core ARM Cortex-A9 Utility Processor Unit (APU), and as you realize having a processor, even a decrease energy ARM one can get issues scorching when working and below load 24/7…
So, what apparently occurred in the course of the evening, with nobody current across the miner is the management board of the Jasminer X4 1U that we had been utilizing for testing simply dying on us for no obvious motive. The one factor that involves thoughts is the chip overheating for some motive and dying on us, though the conventional working temperature doesn’t appear to recommend any overheating points. Usually, when the miner is in its authentic bundle contained in the 1U field with all of the high-rpm server followers the within ambient temperature might be decrease and thus no further cooling has been offered for the controller board’s processor, however whenever you open it up and modify it to make use of silent followers issues may turn out to be totally different. Fortunately we’ve had a spare controller board already ordered simply in case one thing like that occurred, so we changed it instantly and the miner continued to operate like earlier than.
We’ve measure the working temperature of the Zynq APU on the brand new controller board and it’s nowhere close to harmful ranges for such chips, at round 52 levels Celsius (125.6 F) it ought to be just about secure even with out further cooling, proper. Effectively, it could be now, but when what for some motive this temp rises for some time, most likely that’s what occurred for some motive with the APU getting larger load for an extended time period leading to overheating (thouhg it may be some completely unreleated motive as nicely, can’t ensure). Simply to be on the secure aspect, it’s a good suggestion so as to add a small reminiscence chip cooler on prime of the Zynq APU with the intention to hold the working temperature decrease always. Particularly in the event you plan on utilizing a silent modified miner and the the usual configuration the place the problem might be much less susceptible to look.
Additionally, an excellent recommendation could be to order a spare controller board simply in case, particularly in case you are operating greater than only a single Jasminer X4 1U ASIC miner. That is to keep away from potential downtime in case one thing occurs with the controller board in your miner. Do notice that you could join a number of hashing boards with Jasminer X4 ASICs to a single management board (our each had 3 connectors for hash board), although we’ve seen board with extra connectors as nicely. We’ve tried and the management board detects and capabilities with a hashing board linked to the entire three obtainable ports. So, as a short lived answer you may use a single management board to drive a number of hashboards of a number of miners in case you have got greater than juts one and also you get a useless controller board.
